Furnace repair · Garfield County

Furnace down in Enid? Fixed right, no guesswork.

An Oklahoma cold front can drop the temperature 40 degrees in a few hours. When the furnace quits, I come up from Kingfisher, 35 to 40 minutes to Enid, find the real cause and quote it before I fix it.

4.8 stars · 300+ Google reviews · Same day where the schedule allows · Se habla español

Furnace repair call
$210
$99 dispatch plus $111 diagnostic. No extra travel charge anywhere in Garfield County.
Drive from my shop
35 to 40 min
Kingfisher to Enid. No-heat calls go first when it is cold.
Repair price
In writing
Before any repair work starts. The diagnostic is not credited toward it.
What I find

Furnace problems I fix in Garfield County

  • No heat at allIgnitor failure, a gas valve problem, or a tripped safety switch.
  • Short cyclingStarts and shuts off fast. Usually a dirty filter, flame sensor, or a heat exchanger problem.
  • Weak airflowClogged filter, failing blower motor, or a restricted duct.
  • Banging, squealing, rattlingDelayed ignition, a belt or bearing, or loose panels and ductwork.
  • Runs constantlyThermostat calibration, a cracked heat exchanger, or an undersized system.
  • Yellow or flickering flameA possible carbon monoxide risk. Call right away.
  • High gas billsDirty heat exchanger, failing parts, or a furnace running inefficiently.
  • Short cycling in JanuaryA dirty flame sensor, a failing limit switch, or a thermostat reading wrong.
Technician holding a clogged Trane air filter that caused short cycling
A filter like this causes short cycling.
Gas furnace heat exchanger assembly, interior view
I check the heat exchanger on every call.
Furnace control board and wiring
Control board and wiring.
Wall thermostat on an Enid job
Thermostat on an Enid job.
The diagnostic

I do not guess. Here is the order.

  1. Heat exchangerInspected for cracks on every call. It is the safety-critical check.
  2. IgnitionIgnitor, flame sensor and gas valve operation.
  3. AirflowStatic pressure and airflow through the whole system.
  4. ElectricalCapacitors, contactors and the control board.
  5. ThermostatCalibration and operation.
  6. Findings and price firstYou see what I found and what it costs before any repair begins.
Gas furnace repair and service in Hennessey, Oklahoma
Furnace service on the Highway 81 side, Hennessey.
Gas furnace installation in Hennessey, Oklahoma
A furnace I installed in Hennessey.
Furnace data label on a Kingfisher install
The data label tells me what I am working on.
Same-trip repairThe truck carries the parts most furnaces need.
Honest on old furnacesPast 20 years I will still fix it, but I will tell you if the repair costs too much for the life left.
Replace insteadPast 18 years, a cracked heat exchanger, or recurring expensive repairs.
Repair or replace

The truth about your furnace

Repair when the furnace is under 15 years old, the repair is under half the cost of a new one, and there are no heat exchanger cracks. Replace when it is 18 or older, the heat exchanger is cracked, or the repairs keep coming.

Most calls

Repair

Find the failed part, fix it, and confirm the rest of the furnace is safe.

Service call $210 flat
No heat tonight

Emergency

No-heat calls go first in cold weather.

After hours $309Emergency furnace repair
When it is time

Replace

A full estimate on the house, sized properly.

Estimate freeHVAC system replacement

Already got a quote somewhere else? I will review it at no charge: free second opinion.

Brands

Trane trained, every brand fixed

Gas furnace installation in Kingfisher, Oklahoma
Kingfisher furnace install.

Trane Comfort Specialist (TCS SELECT)

Factory trained on Trane and RunTru heating, recertified every year.

Gas furnace in a closet in Kingfisher
Closet furnace.

Every other brand

Carrier, Lennox, Goodman, Rheem, York and the rest. Parts for most ride on the truck.

Enid, Oklahoma grain elevator skyline
Enid. My most frequent Garfield County stop.

Garfield County route

Enid, Waukomis, Hunter and Lahoma are regular stops, so there is no extra travel charge.

Proof

Honest work, measured

4.8
Google rating
300+
Google reviews
6,500+
Jobs completed
47
Years in the trade
Frequently asked

Straight answers

How much does a furnace repair service call cost in Garfield County?

$210 flat: $99 dispatch plus $111 diagnostic. Enid, Waukomis, Hunter, Lahoma and the rest of the county are on my regular route, so there is no extra travel charge. The repair is quoted in writing before I start.

How quickly can you get to Enid?

Enid is 35 to 40 minutes from my Kingfisher shop. No-heat calls go first in cold weather, and I aim for same day when the schedule allows.

Why does my furnace short-cycle in cold weather?

Usually a dirty flame sensor, a failing limit switch, or a thermostat reading wrong. I see it a lot in Garfield County during January cold snaps, and the diagnostic tells me which one it is.

Do you work on every furnace brand in the Enid area?

Yes. Trane, Carrier, Lennox, Goodman, Rheem, York and others. I am factory trained as a Trane Comfort Specialist (TCS SELECT) dealer, but I work on all of it.

Can you work on a furnace that is over 20 years old?

Yes, and I will give you an honest read. If the repair costs too much for the life left in it, I will say so and show you replacement options.

Do you smell gas?

Leave the house now, do not flip switches or use the phone inside, and call your gas utility or 911 from outside. Once the utility says it is safe, call 405-375-4822 and I will find the cause.

Furnace not working?

Tell me what it is doing

Clicking, a flame that will not stay lit, a blower blowing cold. Describe it and I will tell you straight what I think it is before I drive up.

Call 405-375-4822

Enid, Garber, Lahoma, Waukomis, Hunter, Carrier, Drummond, Kremlin, Hillsdale and the rest of Garfield County. Nearby: Kingfisher County, Major County, Blaine County, Logan County.

Hartzell's Heat and Air service van
The van that shows up in Enid.
Scroll to Top
Recent Jobs · 6,500+ Jobs Done
Call 405-375-4822 Book Online