My shop is on South Main, so Kingfisher is not a drive.
Everything I own sits at 602 S Main. When a Kingfisher house quits cooling, I am not routing a truck in from the city, I am already here, and that is the whole reason same day works in this town.
4.8 stars · 300+ Google reviews · Master HVAC · NATE Certified · IGSHPA Accredited
The calls I actually run in Kingfisher
- Systems put in when the house was builtKingfisher has a lot of 1990s and 2000s equipment still running on original parts.
- Undersized returnsPlenty of homes here move air through one small return, which is why a bedroom never keeps up.
- Red dirt in the condenserWind out of the south packs the outdoor coil, and a packed coil cannot shed heat.
- Attic ductwork giving upFlex duct in a Kingfisher attic bakes for twenty summers, then the joints let go.
- Water heaters on borrowed timeI see the same tanks going out across town, usually right after the first cold snap.
- Commercial coolers and rooftopsRestaurants and shops here run on equipment nobody looks at until it is down.
Everything I run out of one shop
Repair
AC, heat pumps, furnaces and package units. I measure electrical, charge and airflow before I quote, and the repair price is in writing before I start.
Service call $210 flatReplacement
Sized with a Manual J load calculation, not by copying what came out. Installs carry my 1 year parts and labour warranty, and repairs carry a 6 month labour guarantee.
Estimate freeGeothermal
Design, loop sizing, install and service. IGSHPA accredited, and I design the loop myself.
Diagnostic $348 flatLight commercial
Up to fifteen tons, bookable online. Walk-in coolers and freezers are the same commercial rate.
Diagnostic $389 flatThere is always a dispatch fee and always a diagnostic fee, and the diagnostic is not credited against the repair. A new system estimate costs nothing.
What happens when I get to your house
- The simple things firstThermostat, filter, breaker and the outdoor disconnect. I do not open the equipment until those are ruled out.
- Electrical under loadCapacitor microfarads, contactor condition and compressor amp draw. If the capacitor failed I check what killed it.
- Refrigerant on gaugesSuperheat and subcooling against the manufacturer’s spec. A leak gets found and repaired under EPA Section 608 rules, not topped off.
- Airflow and coilsStatic pressure, blower speed and amps, and the condition of both coils.
- A written price, then you decideYou get the number before I pick up a tool, and the diagnostic is not credited toward it.
What you get either way
If you smell gas, or a carbon monoxide alarm goes off, leave the house first and call the gas utility or 911 from outside. Then call me. That comes before any troubleshooting I could talk you through.
Plans, and what each one covers
360 plans
A standalone tune-up is $229, weekdays 7am to 3pm. Two of those cost more than the Spring and Fall plan.
How a Kingfisher call works
- No windshield timeMost of town is inside ten minutes of my bay door, so a parts run does not turn into another appointment.
- Parts on the shelf, not on orderCapacitors, contactors, motors, ignitors and the common Trane and Mitsubishi parts live in my shop here.
- I know the housesSecond and third systems for the same families, so I have seen what is in the crawlspace before I open it.
In town you are on Kingfisher’s own city system. Out in the county most places are on Cimarron Electric, which is headquartered right here. The two have different rebate programs, so I check yours before anybody quotes a number.
Ground source around Kingfisher
Kingfisher County ground is good for geothermal, and most places in town and out of it have room for a loop. A geothermal diagnostic is $348 flat, any hour, and a Saturday or Sunday evaluation and sizing is free.
Free Saturday and Sunday geothermal evaluation, consultation and sizing, no charge and no obligation. What geothermal costs a month · Farm and ranch geothermal
The town, and what that means for a service call
Kingfisher is the county seat and it is where I have run this shop for 15 years. I am not building a service area map to look bigger than I am, I live and work in the middle of it. If you are on the north end I can usually be there before the house gets unbearable, and if the part is one I stock the repair happens the same visit.
Straight answers, Kingfisher
How much does a service call cost in Kingfisher?
$210 flat: $99 dispatch plus $111 diagnostic. The $111 is not credited toward the repair, and you get a written repair price before I start. After hours is $309.
How fast can you get here in Kingfisher?
Most of town is inside ten minutes of my shop at 602 S Main. Same day where the schedule allows, and no-cool and no-heat calls go first.
What HVAC problems are most common in older Kingfisher homes?
Undersized returns, attic flex duct that has come apart, and outdoor coils packed with red dirt. Those three cover most of the no-cool calls I run in town.
Is geothermal realistic for a Kingfisher County home?
Often yes. There is usually room for a horizontal loop out in the county, and I size the loop myself. The diagnostic is $348 flat and a weekend evaluation is free.
Which utility am I on, and does it matter?
In town you are on the city system, out in the county it is usually Cimarron Electric. It matters because their rebate programs are different. Tell me your address and I will check the current program before anybody quotes an amount.
Do you work on commercial equipment in Kingfisher?
Yes. Light commercial up to fifteen tons is $389 flat, day or night, and it is bookable online. Bigger equipment gets sized on site.
Tell me what it is doing
Describe the noise, the smell, or the temperature it will not hold, and I will tell you what I think before I drive out. Same day where the schedule allows.
Call 405-375-4822Everyday service across Kingfisher, Canadian, Oklahoma, Garfield, Major, Logan and Blaine counties. For geothermal I travel most of Oklahoma as availability allows.